A floorboard, also known as a flooring board, is a long board making up piece of a wood floor of a structure. As a rule, it alludes to plywood that is implemented to make a subfloor — the harsh floor underneath a completed floor. Many houses are built utilizing these flooring planks – to make a subfloor, which is then covered frequently with materials like linoleum, carpet, hardwood, tile or some other type of overlay flooring – such as laminate. Read and find out how floorboard installation can be done.

How Can You Install Floorboard?

Do you want to know how floorboard installation can be done? Floorboards are installed using the following steps:

  • Measure the length of the floorboard that needs to be cut from the longest side of the board.
  • Cut the board at this measurement.
  • Flip the board over and measure the width of the board.
  • Cut the board at the measurement.
  • Place the boards on top of each other and check if they fit together correctly. If not, adjust them until they do.
  • Use a level to make sure the boards are flat.
  • Drill holes into the boards where needed.
  • Attach the screws through the holes.
  • Sand down any rough edges.
  • Apply stain or sealer to the wood.
  • Install the trim around the perimeter of the room.
  • Seal the flooring.
  • Clean up the area.

These are the steps of floorboard installation.

How Can You Protect Floorboard?

Following floorboard installation, these are some of the steps that you can use to keep your floorboard safe and make it last for a long time to come.

Use Sand

Sand is used to help keep your floorboards from warping over time. This is especially true if you live in a humid climate where moisture can cause wood to warp. If you have a concrete slab, then sand is not necessary. However, if you have wooden floors, then sand is a great way to protect them.

Sprinkle Water

Water helps keep your floorboards from drying out too much. When water evaporates, it leaves behind a residue that can dry out your flooring. You want to make sure that your floorboards are well-watered.

Use Wood Chips

Wood chips are used to absorb moisture and prevent any excess moisture from getting into your floorboards. They are also used to add texture and color to your flooring.